Hyundai WIA KF5 vs. DN Solutions DNM 5700
Comparing the Hyundai WIA KF5 with the DN Solutions DNM 5700? These two 40-taper vertical machining centers are extremely close in many of the specifications that matter most to manufacturers.
Both platforms offer approximately the same X- and Y-axis travel, the same table length, CAT40 Big Plus spindle interface, 30-tool magazine capacity and comparable spindle speed, horsepower and torque configurations.
The most meaningful published dimensional difference is Z-axis travel: 25 inches on the Hyundai WIA KF5 versus 20 inches on the DN Solutions DNM 5700.
Nearly Identical Specifications. 25% More Z-Axis Travel.
The Hyundai WIA KF5 provides 5 additional inches of Z-axis travel compared with the published DN Solutions DNM 5700 configuration.
Hyundai WIA KF5
Published Z-Axis Travel
DN Solutions DNM 5700
Published Z-Axis Travel
+5 inches of Z travel | approximately 25% more Z-axis capacity
Already Have a DN Solutions DNM 5700 Quote?
Send Hillary Machinery the quote and your application requirements. Our applications team can compare the exact DNM 5700 configuration with the Hyundai WIA KF5 and help evaluate which machine best fits your part and process.
Comparing a different DN Solutions model? Send us the model number and we'll compare it with the appropriate Hyundai WIA CNC machine.
Hyundai WIA KF5 vs. DN Solutions DNM 5700 Specifications
The two machines are closely matched across most major specifications. The table below focuses on the core published configuration points buyers typically compare.
| Specification | Hyundai WIA KF5 | DN Solutions DNM 5700 |
|---|---|---|
| Machine Type | Vertical Machining Center | Vertical Machining Center |
| X-Axis Travel | 41.3" | 41.3" |
| Y-Axis Travel | 22" | 22" |
| Z-Axis Travel |
25"
5" more published travel |
20" |
| Table Length | 51.2" | 51.2" |
| Spindle Interface | CAT40 Big Plus | CAT40 Big Plus |
| Tool Magazine | 30 tools | 30 tools |
| Spindle Speed Options | 8,000 / 12,000 RPM | 8,000 / 12,000 RPM |
| Spindle Power Options | 20 / 25 hp | 20 / 25 hp |
| Spindle Torque Options | Approximately 87 / 210 ft-lb | Approximately 87 / 210 ft-lb |
Important: Machine specifications and optional equipment can vary by model year, market and configuration. Always verify the exact equipment included in each quotation.
Why 5 More Inches of Z-Axis Travel Can Matter
On paper, five inches may not sound like a major difference. In actual machining applications, however, Z-axis capacity can determine whether a setup fits comfortably inside the machine or requires compromises.
The Hyundai WIA KF5 provides 25 inches of published Z travel, compared with 20 inches on the DN Solutions DNM 5700.
The additional clearance can be useful when working with:
- Taller workpieces
- Taller fixtures and workholding
- Rotary tables and 4th-axis equipment
- Fixture risers
- Longer cutting tools
- Larger tooling assemblies
- Multi-part fixtures
- Future applications that may require additional vertical clearance
More Z Travel Can Mean More Application Flexibility
Many manufacturers purchase a vertical machining center for the work they have today, but the machine may remain in production for many years.
During that time, part sizes, workholding strategies, tooling and automation requirements can change. A machine with additional Z-axis capacity can provide more flexibility when future applications require additional vertical clearance.
That does not mean every application requires 25 inches of Z travel. For parts and fixtures that fit comfortably within a 20-inch Z envelope, the additional capacity may not materially affect production. The important question is whether the extra clearance provides useful flexibility for the work your shop expects to run.
Where the KF5 and DNM 5700 Are Closely Matched
A credible comparison should recognize that these machines are very similar in many important areas.
- X-axis travel: approximately 41.3" on both
- Y-axis travel: approximately 22" on both
- Table length: approximately 51.2" on both
- Spindle interface: CAT40 Big Plus
- Tool magazine: 30 tools
- Spindle speed: comparable 8,000 / 12,000 RPM configurations
- Spindle power: comparable 20 / 25 hp configurations
- Spindle torque: comparable 87 / 210 ft-lb configurations
Looking at another DN Solutions CNC machine? Send us the model number and we'll identify the appropriate Hyundai WIA machine to compare.
If the Machines Are This Similar, Why Give Up 5 Inches of Z Travel?
When most of the major specifications are closely matched, the additional 5 inches of Z-axis travel becomes a practical point worth considering.
The question is not whether every job needs the additional travel. The question is whether having that additional capacity gives your shop more flexibility over the life of the machine.
Start With the Part — Not Just the Brand Name
The right CNC machine should be selected around the workpiece and manufacturing process, not simply the name on the machine enclosure.
Hillary Machinery recommends evaluating:
- Part material
- Part dimensions and weight
- Fixture size and height
- Required Z-axis clearance
- Rotary-table requirements
- Spindle-speed requirement
- Spindle-torque requirement
- Cutting-tool diameter
- Tool count
- Required cycle time
- Surface-finish requirements
- Part tolerances
- Workholding strategy
- Automation plans
- Production quantities
Automation and Long-Term Machine Utilization
A CNC machine should also be evaluated based on how it may be used several years from now, not simply how it will be loaded on the day it is installed.
Machine tending, automatic workholding, unattended production and future automation can influence machine configuration, fixture design and process planning.
Hillary Machinery is a FANUC Authorized Systems Integrator and can combine Hyundai WIA CNC machine tools with robotic machine tending, automatic workholding and related manufacturing automation.
When the Machines Are Similar, the Distributor Matters More
When two CNC machines are closely matched technically, the company responsible for selecting, applying, installing and supporting the machine becomes an increasingly important part of the decision.
Hillary Machinery has represented Hyundai WIA CNC machine tools for more than 23 years and supports manufacturers throughout Texas, Oklahoma, Arkansas, Louisiana, Mississippi, Alabama and Tennessee.
Our capabilities include:
- CNC machine selection
- Applications engineering
- Turnkey machining systems
- Tooling and workholding integration
- FANUC robotic automation
- Installation and training
- CNC field service
- Parts and preventive maintenance support
View Hyundai WIA KF5 Specifications »
Compare the KF5 Before You Decide
Send us your DN Solutions quote, part drawing or application requirements and let Hillary Machinery prepare a side-by-side CNC machine evaluation.
Comparing a Different DN Solutions Model?
Let us do the comparison for you.
If you're considering another DN Solutions CNC machine, send us the model number you're looking at. Hillary Machinery will compare its published specifications with the appropriate Hyundai WIA CNC machine and send you a side-by-side comparison.
No need to research dozens of specifications yourself. Just tell us the DN Solutions model you're considering.
Hyundai WIA KF5 vs. DN Solutions DNM 5700 FAQs
Are the Hyundai WIA KF5 and DN Solutions DNM 5700 similar machines?
Yes. The two machines are closely matched in X-axis travel, Y-axis travel, table length, CAT40 Big Plus spindle interface, 30-tool magazine capacity and available spindle performance.
What is the main dimensional difference between the KF5 and DNM 5700?
The primary published dimensional difference is Z-axis travel. The Hyundai WIA KF5 publishes 25 inches of Z travel, while the DN Solutions DNM 5700 publishes 20 inches.
How much more Z travel does the KF5 have?
The KF5 provides 5 additional inches of Z-axis travel, or approximately 25% more Z-axis capacity than the published DNM 5700 configuration.
Why does additional Z-axis travel matter?
Additional Z travel can provide more clearance for taller workpieces, taller fixtures, rotary tables, longer tools and future machining applications. Whether that additional capacity is important depends on the specific part and setup.
Do the KF5 and DNM 5700 offer similar spindle configurations?
Yes. Depending on configuration, both platforms can be equipped with comparable 8,000 or 12,000 RPM spindle packages, 20 or 25 hp spindle power, and approximately 87 or 210 ft-lb torque configurations.
Can Hillary Machinery compare another DN Solutions model with Hyundai WIA?
Yes. Send Hillary Machinery the DN Solutions model number you're considering. Our team can identify the appropriate Hyundai WIA machine and prepare a side-by-side comparison using published specifications.
Can Hillary Machinery compare my DN Solutions quote?
Yes. Send Hillary Machinery the competing machine quote along with your part drawing, material, tolerances, fixture requirements, production quantity and cycle-time requirements. Our applications team can compare the exact machine configurations and help evaluate the appropriate Hyundai WIA solution.
DN Solutions and DNM are trademarks or product names of their respective owner. Hillary Machinery is not affiliated with or authorized by DN Solutions. Comparisons on this page are based on published specifications for the machine configurations identified above. Machine specifications and options may vary by market, model year and configuration. All specifications should be verified against the exact equipment being quoted.