.jpg)
Type:
Tool Room Mills
Manufacturer:
TRAK MACHINE TOOLS
Model:
TMC12
Status:
For Sale
New
Introducing the World's First Toolroom VMC featuring the New ProtoTRAK RMX. It's a full featured 3-axis machining center when you need to run low volume production. The amazing new ProtoTRAK® RMX CNC delivers a powerful easy-to-use interface. With the flip of a switch, you enter into Toolroom Ops™. Now your VMC works like our popular TRAK® DPM, only with an enclosure that keeps chips and coolant contained. Optional electronic handwheels allow you to crank the table and saddle for that familiar feel of working a manual machine. Transition from manual operations to 2 and 3-axis CNC. PDF hillaryinc.net/trakpdf/traktmc.pdf
Machine Specifications • Table Size – 23.62″ x 51.18″ • T-slots (number x width x pitch) – 5 x .709″ x 4.921″ • Travel (X, Y, Z axis) w/ Soft Limits – 50″ x 27″ x 25″ • Spindle Taper – 40 Taper • Spindle Speed Range (RPM) – 50 – 8,000 RPM • Spindle Nose Diameter – 3 ¾” • Tool Clamping Force (90 psi) – 2,200 lbs. • Tool Holder Type – CAT 40 or BT 40 • ATC Tool Capacity – 16 • Maximum Tool Weight (incl. holder) – 15 lbs. • Maximum Tool Diameter – 3.14” • Carousel Speed – .8 sec from station to station • Tool Selection System – bi-directional/shortest path • Spindle Motor HP (peak) – 22.5 HP • Spindle Motor HP (continuous) – 15 HP • Power Requirements (standard) – 208V (200-240V is acceptable), 3P, 88A Note – Current can be as high as 93A with the 4th axis option ordered (+5A) Power Requirements (optional) – 480V w/ transformer option (432-528V is acceptable), 3P, 43A Note – Current can be as high as 46 amps with the 4th axis option ordered (+3A) Maximum Weight of Workpiece – 2,200 lbs. • Height of Table from Bottom of Bed*** – 38.37” • Min. Spindle Nose to Table Distance**** – 2.25” • Max. Spindle Nose to Table Distance**** – 28.75” • Distance of Tool Carousel to Table – 21.5” • Spindle Center to Spindle Head Casting Face – 27.56” • Min. Machine Height*** – 105” • Max. Machine Height (head all the way up)*** – 120.5” • Overall Width of Machine (w/ side doors open, auger chute, and chip container in place) – 206.27” • Overall Length of Machine (w/ electrical cabinet fully open 180°) – 156.22” • Footprint of Machine w/ Coolant Tank in Place (w x l) – 133.86” x 144.76” • Weight Net – 14,300 lbs. • Weight Ship – 14,800 lbs. • Rapid Traverse X, Y, Z – 1,000 ipm • Coolant Capacity – 70.5 gal • Coolant Pump – 750 Watts • Coolant Wash Pump – 1290 Watts • Air Pressure – 3.0 CFM (at 90 psi) or 25 SCFM • Air Quality – Air dried/water separator upstream of TMC • Lubrication Pump Capacity – 2 liters Note: *** Height changes slightly based on how machine is leveled on leveling screws. **** Can vary slightly due to home switch location and soft limit settings.
.jpg)
.jpg)
.jpg)
.jpg)
