NIIGATA HN100D-II-FC Horizontal Machining Centers | Hillary Machinery
Horizontal Machining Centers
For Sale

INCREASE YOUR PRODUCTION BY MACHINING IN SINGLE SETUP WITH NIIGATA'S HN80D-Ⅱ/100D-Ⅱ FC FACING CENTER Turning, facing, boring and milling capabilities are all combined in one machine for complete machining in single set-up. Built-in, CNC-controlled boring and facing head utilize the versatility of combined turning operations with machining center operations. Single set-up approach for the machining valve bodies, pump bodies, bearing housing, differential or axle housing, clutch housing, etc.

X Travel79.9"
Y Travel51.1"
Z Travel47.24"
Power35 hp
RPM2,500 RPM
ControlCNC (Fanuc 30i)
Dimensions235" x 388" x 186"
Equipped With

• Automatic Tool Changer with 62 Tool Capacity (Optional up to 255) • Manual Rotation of Tool Change Magazine during Cycle • 20-2500 RPM Bar Spindle (Programmable speed in 1 RPM increments)  • 15-600 RPM for "U" Tool Operations • 15000 RPM (Optional) • Automatic Spindle Orientation Accomplished Electrically • Spindle Cooling Unit Controlled by a Thermal Sensor in the Machine Base • 1 Degree Indexing Table • 11,000 lbs. Maximum Load on Pallet for NC Table Mchine; 7,700 lbs. for 1 Degree Index Table • Rotary Type Twin Pallet Change System • Automatic Lubrication on all Axes • Front and Rear Spiral Chip Augers Built into the Bed • Outside Chip Conveyor • Fully Protected Steel Way Cover w/Sloped Surface for Chip and Coolant Flow • Full Enclosure-Type Splash and Chip Guarding System with Fluorescent Work Light • Work Completion and Emergency Lamp • Flood Coolant System with 1000L Coolant Tank, Clean Design Coolant Manifold and Eight Ball-Socket Type Nozzles • Niigata Facing Center Software Package (SNAP) • FANUC System 30iM, CNC • 10.4” Color LCD • 499 Tool Offsets • 128 Kb Program Memory Storage (320m/1050’) • Tool Offset Memory C • 63 Registered Program Numbers • Single Direction Positioning • Extended Part Program Editing • Helical Interpolation  • Spindle Load/Speed Meter w/Override on Control Display • Rigid Tapping • Manual Pulse Generator • Leveling Bolts, Plates, Leveling Blocks and Anchor Bolts • Dummy Tool • Spare Lamp and Fuses • Standard Service Tools • Self-Diagnostics • Automatic Power-Off Device • Two Sets of Manuals • 100 V Electrical Outlet • Absolute Position Detector X,Y,Z (maintain position with power off) • Machine Installation • Operator and Program Training • Two Sets Instruction Manual and Documentation (1 printed, 1 CD-ROM) • One Year Machine Warranty • Two Years Fanuc Control Warranty

Niigata HN100D-II-FC (FACING CENTER) Horizontal Machining Center

Niigata HN100D-II-FC (FACING CENTER) Horizontal Machining Center
Horizontal Machining Centers